Posts Tagged ‘tiling’
Wednesday, January 11th, 2012
Before beginning to install any random type of tile in your kitchen, you must first consider the pros and cons for each available variation of tile. It does not matter if you are installing tile for the floor, backsplash, or countertops because every part of the kitchen needs to have the best tile possible for its unique purpose. While backsplash and floor tile can sometimes be rather similar, you are going to probably go with a different, more sturdy piece of material for countertops. For example, in my kitchen I have some rather cheap hardwood flooring, but the countertops are made out of granite. If you are looking to lay down some tile for either of these three parts of the kitchen you have come to the right place because all three will be discussed in this article.
The whole process will begin with the installation of the floor tile since kitchens are more commonly renovated in this manner. Before laying the floor tile for the kitchen, you would need to remove the material that was previously installed on the floor. After removing the material, check if the floor boards that were used by the previous material are durable and suitable enough to install the tiles on. Check whether the floor boards are flat to prevent an unbalanced floor once you have installed the tiles on them. You can purchase a powdered material to make the floor flat if in case some areas are not even before you begin to install the tiles. Once this is done, you can begin to lay down the tiles on the floor of your kitchen. Since you need to apply some grout in between the tiles, ensure that there is a small space for it and once this is done, allow the floor tiles of the kitchen to settle for at least one week. You can finalize everything after one week and benefit from the hard work that you put in for the project.
Installing the tile for the backsplash is quite similar to the procedure for the floor tile. The backsplash, also known as the wall tile, is the tile found above the countertop. The backsplash gives personality to your kitchen and makes it appear more welcoming. Much in the same way you have to remove the existing floor tile to make room for new ones, you must also remove any tile or wallpaper on the backsplash. This must also be cleaned and evened out before putting the tile on the wall. For this kind of installation, you will have to make use of an adhesive to make sure the tile stays on the wall.
It will be necessary to have a support post near the base of the backsplash before the installation process begins, which is what makes the backsplash different from the floor tile. Since the adhesive may lack adhesiveness, the support post will help keep the tiles up as well as let you make the tiles straight as they are being installed. Placing a plastic spacer in the middle of two tiles will ensure that the whole thing will be properly aligned, which is one more piece of advice to keep in mind when installing a backsplash.
The last install process we will talk about is countertops. Countertops can be the toughest to install because they will be bigger and heavier than tiles and are usually made out of more expensive material. The cutting process is usually too hard to complete on your own, so you will need to find a professional to do that for you; however, once the countertops are cut, you can probably handle installing them with the help from a friend or two. When a professional cuts your countertops for you, they will come over to your house and measure out the sizes before anything else. This means when you are installing them, you don’t have to worry about spacing anything out or anything like that. You just have to lay the countertops on top of the counters in their correct locations, much like the classic children’s game with the shapes and the holes to put them in. Once you are done laying the countertops down, you just need to drill them into the counters. Do this from underneath so there aren’t any nails or screws sticking out on the top of the counter.
Joe Wallis publishes the Learn How to Lay Tile website that can help you learn to install tile backsplash and other tile projects.
Tags: constructions, home, home improvement, home repair, tile, tile and grout repair, tiling
Posted in tile and grout repair | No Comments »
Thursday, December 22nd, 2011
For a number of years the use of tiles as floor covering for bathrooms, kitchen and other areas inside the house has gradually become fashionable, but do-it-yourself installations are fairly new trends in mounting of tiles on the floors. Some time ago, a professional was hired to install the tiles on the floor of the room if you wanted them to be placed properly. A number of modifications can be done during the installation process, which would involve a variety of methods in carrying out the task. Whatever tile material – be it stone, porcelain, ceramic or other kinds – is used in covering the floor, it will definitely give one of the rooms or all the rooms an impression of significance and stability. Furthermore, the tile floor covering will enhance the elegance and design of the room aside from providing a long-term solution to your floor covering requirements. If you install the floor tiles on your own, you will be able to set aside money which you can use to purchase the more luxurious kind of floor tile. However, if you have no idea on how to properly install the tiles on the floor, the money you set aside will not be much help for you.
The two largest factors in determining the best way to lay tile are the type of tile you will be using and the type floor surface you will be covering. Furthermore, various manufactures may provide different instructions for how to properly install their tiles. But if you are able to follow directions and get a helping hand when you need it, then laying floor tile on your own is certainly possible.
Although a number of tools have to be available in order for you to install the floor tiles, there are some vital tools that have to be present when doing the job: the floor tile, tile nipper, tile cutter, tile backer board, hammer, razor knife, level tape measure, felt-tip pen, caulk, gloves, and safety goggles.
The first thing you need to do before you start doing anything else is check out the base floor you have to work with. Check how sturdy it is and make sure it is level before you begin because you want to make sure your tile flooring has a nice, level base to sit on. If the base wood flooring is really uneven, you will need to replace it before moving on to the tile. Otherwise, you can be left with even worse problems down the road and your tile floor won’t last very long. The second step is laying a tile backer board. This gives your tile flooring something to lay on so it is not directly touching your base wood flooring.
You are then ready to start measuring how many tiles you need and how big you want them to be. Next, you can lay them on the floor, leaving enough space in between each for grout. Once you have laid the tile and applied grout, let it sit for seven days. After that you are ready to seal the tile. Hopefully this overview has given you a feel for the steps needed to lay tile flooring in the rooms of your own house.
Author Joe Wallis runs the website Learn How to Lay Tile, which describes how to install wall tile and similar topics.
Tags: construction, decor, decorating, flooring, floors, home improvement, homes, tile, tile and grout repair, tiling
Posted in tile and grout repair | No Comments »
Monday, September 5th, 2011
Appealing, waterproof and safe and sound to walk on are definitely the characteristics of a great bathroom floor tile. Available in a variety of colors, textures, design and patterns, these types of bathroom design ideas will prove to add attraction to your bathroom as well as help it become complete. With the newest style and design tiles, you may create extraordinary designs on the bathroom floor without having to devote more money. Incorporate floor tile edges of a original shade on the tiled bathroom floor or make a distinctive perimeter by switching different colours. The method works beautifully if you utilize solid colour tiles on the floors. This is a form of visual method used to create a lot more intriguing bathroom floor. If you utilize identical color tiles for the bathroom walls and also floor, make use of a unique tile dimensions for walls. It’ll have a far more interesting visual effect. In case you wouldn’t like to use the identical size both on the floor and walls, place wall tiles diagonally.
You will be astonished to learn that grout coloring could also produce a substantial distinction in relation to planning bathroom flooring. Work with grout colours which contrast with your current tile color. For example use red or blue grout for light or white coloured bathroom tiles. Make the grouts darkish so your lines are clearly apparent. Also make sure that the grout outlines go straight with no break. A few bathrooms contain contemporary style add-ons and fixtures. To embellish these types of rooms, utilize lively shade bathroom tiles along with visuals next to solid backgrounds. This could give the bath room a modern-look. Whether it’s a romantic or even Victorian look that you might want to give to your bath room then you need to do some purchasing.
Utilizing soft shade flowery tiles similar to light green, pink or sky blue as well as painted by hand porcelain ceramic sinks is capable of turning your dream in to reality. Use any concept or make your own personal design using bathroom tiles, but ensure that the floor tiles are very well protected with sealers within the heavy water region. The problem you may have with the bathroom floor is leaks and seepage that may spread to an adjoining family room or even bed rooms.
Keep your bathroom dry by depleting this kind of water each time you use it. ceramic floor tile ideas are easily accessible in the retail outlets and you may additionally search for them on the internet as well. Simply check out an internet tile to see whether or not your type of bathroom tiles are available or not.
A bathroom are is considered the most regularly used area that people make full use of in the home. It’s also some of the tiniest. Which can be the reason why, when people have the need to redesign the home and change it, they’ll start in this area. It’s a lot easier to begin with an spot which is easy to do something with and will not require several months to accomplish. There are many factors which you’ll be able to modify – but once in a while we might need to put in place such a substantial budget for ourselves that most of us may only want to do some thing reasonably small compared to what we may have thought possible.
Having attractive and beautiful bathroom tile pictures will surely make your bathtime far more relaxing and also feel luxurious, and you may produce this making use of any type of ceramic tile ideas therefore why don’t you splash out on re-decorating your bathroom!
Tags: bathroom, bathroom tiles, diy, floor tiles, home, home improvement, home repair, interior design, shopping, tile and grout repair, tiles, tiling, wall tiles
Posted in tile and grout repair | No Comments »
Sunday, July 31st, 2011
Wall tiles are the tiles that are used to cover your wall and hence protecting it from several damages and dirt. Due to a lot of complaints of seepage manufacturers have designed these wall tiles to get rid of these problems. You can put these tiles in every room to give your home or the office a trendy, glamorous look. Wall tiles also save your time in a way that you don’t have to waste much of your time as well as energy on cleaning up the walls. The first step to install a wall tile is to make the wall ready for the tile.
Your wall will be ready for tile installation if you have already used a special adhesive to seal it. You need to remove any wallpaper or paint before you apply adhesives. If the wall is completely cleaned, then you can apply the adhesive in thin layering.
Does the wall have any sort of a glossy look after you seal it with the adhesive? If so, you can do some light sanding to remove it, and then use a bit of spackling to patch up any cracks you may notice on the wall.
Next thing to figure out is the kind of pattern that you need on the wall tile. There are a lot of patterns along with colors and sizes that are available in the market to choose from. Make sure to make a correct combination with the room and choose a tile that would go accurately with your room. There are a lot of manufacturers that sell low quality tiles in high process. Make sure to have a through research and the quality before you choose to install the wall with them, especially if you have a tight budget.
In order for you to install the tiles, you need to know how to install them properly.
To install the tile, the base of the wall must be filled with a support strip. This help sin giving support to the wall tiles as you draw them down. This also gives the installation a reference point. Now, you can begin putting the first tiles down after you have attached the adhesives and the wall strips.
Now, begin by locating the support strip and put the first few pieces of wall tiles right above it, and make sure to keep them good and square. A good tip to be able to do that is to twist, and not slide the tile when you start to install it. If you try to slide it into place, the adhesive will be damaged and you may have to start all over again.
When you are installing, it is advisable to place plastic spacers between sections of the tiles. This will help in keeping the tiles in their proper alignment.
Now that you have been shown how to begin your tile installation, you shouldn’t have any problems doing the rest of it by yourself. Just keep putting down the tiles in the same order as you did in the beginning and you should more than likely be able to get done quite a bit quicker than you may have believed you would when you first got started. Just remember, knowing the correct way to install wall tile is just the beginning, and you have to be capable of putting your knowledge into actions.
Joe Wallis teaches topics related to how to lay tile, such as how to install wall tile the right way.
Tags: construction, home improvement, remodeling, tile, tile and grout repair, tiles, tiling, wall, walls
Posted in tile and grout repair | No Comments »
Thursday, May 13th, 2010
Natural stones tiles are a good option for tiling, whether it be inside your home or outside of it. They look good, and are both versatile and durable. The price of them has fallen in recent years, and whilst they do cost a bit more than standard ceramic tiles, they offer better value for money.
Travertine, granite and slate are the main types of natural stone tiles available, and what follows is a brief description of each of those types…
Travertine – This is a form of limestone, which is porous and contains many holes. Though you might wonder why you would want slight holes in your tiles, the aesthetic look is actually very appealing. Travertine is available in a variety of shades of browns, from coffee to light tans. You can use these tiles on both floors and walls.
Granite – This is the most commonly used type of natural stone tile, because it is the most durable. Some people think that it does not look nice enough and that there are not enough different styles, but that is really just a case of personal preference. For floors and outdoor purposes, it really is the best option.
Slate – These tiles come mostly in gray, though you may find that some other colors are mixed in too. They come in varying thicknesses, even from the same box, so maintaining a level floor with them can be difficult; therefore, they are best used for walls and countertops. A big advantage of them is that they are the easiest type of natural stone tile to cut and shape.
To get an idea of exactly how each of these types of natural stone tiles looks, then just take a look at the website of a store that specializes in making / selling them. When it comes to buying, try and get some samples first if you can as how a tile looks in a store or on a website can be quite different to how it will look when in your home.
Remember, that using natural stone tiles is not an either / or decision that you have to make. You can use in a mixture of travertine, granite and slate tiles in the same room to very good effect. You do need to exercise some caution though, and should get a second opinion on your design ideas before getting started.
Next : Natural Stone Tiles
Tags: Bathrooms, diy, home improvement, kitchen, natural stone tiles, stone tiles, tile and grout repair, tiles, tiling
Posted in tile and grout repair | No Comments »
|
